Technical Specifications

Electrical:

• 100 – 200 VAC; 50 – 60 Hz (200 – 230 VAC; 50 – 60 Hz available); 15 Amps
• CE Certified

Physical Dimensions:

• Mass: 88.6 kg (195 lbs)
• Size: H x W x D = 58.4 x 63.5 x 92 cm (23 x 25 x 36.25 in.)
• With top open: H = 99.1 cm (39 in.)
• Fully configured dimensions: H x W x D = 99.1 x 76.2 x 243.8 cm (39 x 30 x 96 in.)

Software:

• Proprietary Oligo PRO™ software for system control/data analysis

Data Export Format:

• Microsoft® Word or Adobe PDF reports for individual samples or entire sample plate

Environmental Conditions:

• Indoor use, normal laboratory environment

External Temperature:

• 15° to 25° C (59° to 77° F)

Relative Humidity:

• Less than 80% (no condensation)

Detection Wavelength:

• 254 nm using mercury lamp and interference filter

Sample Injection:

• Simultaneous, 96-well or 24-well electrokinetic injection

Sample Volume Required:

• Typical volume 100 μl/sample well (minimum 20 μl/well)

Sample Format:

• Desalted to maximize injection efficiency; 1 – 10 μM concentration range

Oligo Sizing Range:

• 10-mer to 80-mer; longer lengths under appropriate sample loading conditions

Sample Throughput:

• Analysis of 96 different 60-mer samples in approximately 70 min (Oligo PRO™ 96XT)
• Analysis of 24 different 60-mer samples in approximately 60 min (Oligo PRO™ 24HT)

Back to Top

HOME