Technical Specifications

Electrical:

• 100 – 200 VAC; 50 – 60 Hz (200 – 230 VAC; 50 – 60 Hz available); 15 Amps
• CE Certified

Physical Dimensions:

• Mass: 88.6 kg (195 lbs)
• Size: H x W x D = 58.4 x 63.5 x 92 cm (23 x 25 x 36.25 in.)
• With top open: H = 99.1 cm (39 in.)
• Fully configured dimensions: H x W x D = 99.1 x 76.2 x 243.8 cm (39 x 30 x 96 in.)

Software:

• Proprietary cePRO Manager™ software for system control/data analysis

Data Export Format:

• Microsoft® Word or Excel™ reports; raw data exportable in ASCII format

Environmental Conditions:

• Indoor use, normal laboratory environment

External Temperature:

• 15° to 25° C (59° to 77° F)

Relative Humidity:

• Less than 80% (no condensation)

Detection Wavelength:

• Fixed wavelength, using deuterium (193 – 400 nm), zinc (214 nm), cadmium (229 nm) or mercury (254 nm) lamps and narrow band pass interference filter

Sample Injection:

• Simultaneous, 96-well injection using vacuum or voltage

Sample Volume Required:

• Typical volume 100 μl/sample well (minimum 20 μl/well)

Operational Conditions:

• Maximum total CE current: < 3 mA (30 µA/capillary)
• Maximum CE voltage: +/- 16 kV
• Maximum CE field strength: up to 250 V/cm depending upon capillary length and run buffer
• Forced air cooling of capillaries at room temperature or ∼15° C

Capillary Dimensions:

• 50 µm or 75 µm i.d.; 200 µm o.d.
• Effective length 30 cm to 60 cm; 20 cm fixed length from detection window to capillary outlet

Detection Sensitivity:

• Low µM concentrations for standard injection volumes

Back to Top

 

Links:

Contact Us Service & Support